Hadleigh Electric Gates

Multi gateway installation
Two Automatic Hadleigh Design gates in untreated iroko. Bespoke Ral posts.
Both are automated with the Came Frog X Brushless system. One leaf on each pair is fitted with an adaptor for 180-degree opening.
The pedestrian gate was refurbished and fitted by us with a manual gate closer.
Two Telguard intercoms fitted, one at the pedestrian gate and one at vehicle entry gate.
Gate monitored by the Came Connect System
Came Connect lets us remotely monitor the gates from a PC, smart phone or tablet. This is a great tool for us and the customer which in many cases will save a call out to site if there is a minor fault.

Sawston, Cambridgeshire

Installed February 2025

REF: HSC25

File Upload

Please upload an image of where your gate is going to be installed. This will allow us to gain understanding of what is possible at your installation site as well as any potential issues we may spot.

Max upload size: 5mb

Accepted file types: jpg, jpeg, png

Gate Piers

The purpose of gate piers are to support gates as well as to define an entranceway. Please let us know if you plan to keep your existing piers and if you are, please select what material they are made from. Or, if you would like new or replacement piers, please select New and let us know what material you would like.

Gate Height

Simply let us know how high you would like your gates. From the floor to the highest point of the gate.

Gate Width

This measurement should be taken between the existing piers if you plan on keeping them. This measurement is indicated by the yellow arrow. If you would like us to install new piers as part of this project, please measure the total distance from where the left pier will start to where the right pier will finish and ensure you select 'New Piers' when asked later in the form. This measurement is indicated by the white arrow.