Updating the entry code on a Videx keypad

You may either have one or two codes in your keypad

The procedure for one code

Key in your master code press and enter
The red programme light should now be on
Put in your master code again or change it if required and press enter
Key in your new entry code and press enter
Key in 01 and press enter
To finish press enter twice, the red light should now go out

The procedure for two codes

Key in your master code and press enter
The red programme light should now be on
Key in your master code again or change it if required and press enter
Key in first new entry code and press enter
Key in 01 and press enter
Key in your second new entry code and press enter
Key in 01 and press enter
To finish press enter twice

If you have forgotten your master code

If you have a keypad that has been installed by us and you do not have your master code please contact us. If your gates have been installed by an installer other than us then unfortunately we will not know your master code. If this is the case you will have to contact your installer or Videx Security.